+-------+
| po-12 |
+-------+
-----links-----//+
https://teenage.engineering/guides/po-12/en
https://teenage.engineering/_img/555debd7513d23030053dce1_original.pdf
-----links-----//-
-----keys-----//+
auto power off:	after 5' or 60' if line in plugged.
battery status:	sound + bpm
reset clock			remove batteries and start over (then press any key to set)
alarm:				sound + pattern and then knobs. Any key to set.
disable alarm		turn knob A all the way down
tempo:				bpm + knob B  (press bpm for big jumps of tempo)
swing:				bpm + knob A (higher values, more swing)
master volume:		bpm + 1-16
effects:				FX + 1-16
sdd effect:			hold FX + 1-16 to add effect  (hold FX alone to clear effects)
select sound:		sound + 1-16
parameter lock:	hold write + knobs to write sound parameter changes over time
live record:		(quantized) hold write + 1-16 and when done release write
multiplier:			1-16 + bpm (multimple times increase multiplier)
copy pattern:		hold write + pattern and press 1-16 to paste the active pattern to the corresponding new slot.
clear pattern:		press funct + pattern to clear the active pattern.
chain pattern:		press & hold pattern and select which patterns 1-16 to chain by pressing the corresponding key 1-16.
						up to 16 patterns can be chained.one pattern can be selected multiple times.
						example 1,1,1,4 plays pattern 1 three times then moves on to pattern 4.
						after last pattern is played the sequence will start over again.
-----keys-----//-
-----sounds-----//+
sound 1-16
1. bass drum
2. snare drum
3. closed hi-hat
4. open hi-hat
5. synthesized snare
6. sticks
7. cymbal
8. noise
9. hand clap
10. click
11. low tom
12. hi tom
13. cow bell
14. blip
15. tone
16. bass tone
-----sounds-----//-
-----effects-----//+
effect 1-16
1. low sample rate
2. distortion
3. bit crush
4. delay
5. lowpass filter
6. lowpass sweep
7. hipass filter
8. hipass sweep
9. stutter 4
10. stutter 3
11. repeat 8
12. repeat 6
13. note shuffle
14. feedback
15. parameter lfo
16. vibrato
-----effects-----//-